|
5 digit, -19999 to +20999
red LED display |
|
Display can be user programmed
for 3½, 4 or 4½ digits |
|
Microprocessor controlled
A/D |
|
Four front panel annunciators
to display alarm status or status indicators for selectable
functions |
|
Universally powered from 100 to 132VAC, 200-264VAC and 10
to 40VDC
|
|
No calculation setup for
scaling and offsetting. Simply enter input and display high
and low values |
Display format selection
of:
- decimal point
- count by 1, 2, 5 or 10
- least significant “dummy” zero
- 3½, 4 or 4½ digit display |
|
Selection for upper and
lower limits that when exceeded will cause display to flash |
Programmable A/D functions
of:
- Update time from 10 per second to once every 20 seconds
- Averaging of programmable 1 to 25 input reading by walking
window means
- Programmable window of measurements that can be allowed in
the averaging function |
|
User configurable non-linear
17 point correction |
|
User programmable front
keys and external input assignments |
Programmable alarm functions
(See Data Sheet for Specific functions) |
|
Max./min. peak detectors
with capture delay |
|
Second scale factor |
|
CE Approved |
|
Password function allows
lockout of access to programming functions without knowing programmed
pass number |
|
Quick zero and span adjustment
from front panel |
|
Excitation power supply |
|
1/8 DIN cutout |
|
NEMA 12 rated front panel |
|
Screw terminal connectors |
|
Operating temperatures
of –10 to +60°C |
|
Accuracy: .01% |
