|
| |
|
Techne
Fluids
for Liquid Baths
Techne Home
Want to get the best
performance from TechneŽ liquid baths or those obtained from other sources? We highly
recommend the purchase of our bath fluids that offer proven bath performance at a lower
cost than traditional fluids.
Low viscosity
Improves bath uniformity and stability
Enhanced heat-up and cool down rates
Lower cost than glycol and silicone oil type fluids
Safe and non-toxic
Convenient easy pour 5 gallon containers
|
|
Low Temperature Bath
Fluid (5 gallons)
Catalog# 7012602 |
|
Low-Temp bath fluid MSDS and spec's
|
|
A hydrocarbon based fluid with the ideal
combination of Low toxicity and Low odor, making
it an excellent choice for use in liquid baths. Our low temperature fluid
provides an unmatched level of performance without imposing risk to the environment,
equipment, or personnel. The fluid offers a low viscosity rating and
unequaled heat transfer characteristics through its entire operating temperature range down to -40ēC, with
a recommended maximum of +125ēC.
NOTE: This fluid
should only be used with the following plastics; ABS, Epoxy, Acetal, Teflon,
Viton, Kalrez, Chemraz, Fiberglass, Graphites, Flouroelastimers. For all
other plastic types contact Techne for specific recommendations.
A fume hood is recommended for open baths being operated
at temperatures above +50ēC.
|
The high temperature fluid offers industry a practically non-toxic,
versatile bath fluid that has proven to be cost effective and thermally stable at
temperatures up to +250ēC. This fluid has demonstrated excellent performance over a wide
range of temperature without compromising economics or system integrity. Unlike the less
stable mineral oil based fluid, our high temperature fluid provides the user with the
confidence and reliability for long term usage without the premium price of other fluids.
Recommended temperature +60 to +250 degrees C.
As with most high temperature fluids, a fume hood is
recommended for operating temperatures above 150ēC.
NOTE: This fluid should only be
used with the following plastics; ABS, Epoxy, Acetal, Teflon, Viton, Kalrez,
Chemraz, Fiberglass, Graphites, Flouroelastimers. For all other plastic
types contact Techne for specific recommendations.
OTHER TECHNE CALIBRATION
SOLUTIONS
Dry-Block
Calibrators Fluidized
Baths
Thermometer Systems
|
