PSC-4000                                                                                   Martel Home
COMMON FEATURES
Reads and simulates process control signals
Memory for three (3) calibration points in each range
Multiple input/output ranges for current and voltage modes
Built-in 24 VDC source for powering two-wire transmitters
Accuracy of 0.025% FS ± 1 LSD
Large 32 character dot matrix display
Test leads, carrying case, 4 AA batteries, NIST Certificate, and instruction manual included
The Martel Electronics PSC-4000 Process Calibrator is a portable, hand-held, full function voltage and current calibrator with the capability to both read and simulate common process control signals. The PSC-4000 incorporates multiple input/output ranges for both current and voltage operating modes. When operated in the current mode, the calibrator can source, simulate, or read over a 0 to 24 mA range, with 0.01 mA resolution. It can also supply 24 VDC to power a two-wire transmitter, while simultaneously reading back its output both in milliamps or % of full scale. When operated in the voltage range, the PSC-4000 can read or source over two ranges, 0 to 20.00 V, or 0 to 200.0 mV. For convenience, up to three (3) calibration points can be stored in memory for each voltage or current range. These calibration points are non-volatile, and will remain in memory until the user changes them.

View PDF file (49.4KB)

Calibrators | Pressure | Temperature | Loop | Voltage & Frequency | Multi-Function | Bench

Other | Process Displays | Power Supplies

To Place an Order, or to Receive any Additional Information, Please e-mail:  process@bcgroupintl.com, call (314) 638-3800 or fax (314) 638-3200