|
| |
Tuff-Tools T100
Martel
Home
Single Function Voltage, Frequency
& Milliamp Calibrators Made With the Technician in Mind |
|
|
|
|
|
COMMON FEATURES
|
 |
|
High
Accuracy/Source and Read Capability membrane keypad with simple
controls |
|
Rugged,
Dust Tight, Water Resistant Case |
|
Easy to
Read Super-Twist LCD |
|
Intuitive Controls make operation Easy even for infrequent
users |
|
Powered
by a common 9 Volt battery |
|
The Tuff-Tools line
of calibrators is designed to give the technician laboratory grade accuracy in
a family of rugged, easy to use instruments.
The Tuff-Tools family
consists of 3 Process Signal calibrators (mA, Volts, Frequency), 2 Temperature
calibrators (T/C, RTD) and a Pressure calibrator available in several ranges
(200" H 2 O, 30 PSI, 100 PSI).
Operation of these calibrators is made
easy through the use of a sealed membrane keypad with simple controls. The
outputs are set through the use of step and ramp keys which allows both large
and small output changes to be made with ease.
Each Unit Includes: Test
leads, carrying case, 9V battery, NIST Certificate, and instruction
manual. |
|
Process
Calibrator
- T100 |
|
Range: |
0.00 to 24.00 mA
25.0% to
125.0% |
|
Operating Modes: |
Source, Simulate, Read,
Read/Power |
|
Accuracy¹ : |
± 0.025% FS ± 1 LSD |
|
Operating Temp.: |
0 to 50°C |
|
Storage Temp.: |
-20 to 60°C |
|
Temperature Stability²: |
.01% F.S./°C |
|
Loop Power: |
24V DC |
|
Step Size: |
4 mA (0, 4, 8, 12, 16, 20
and 24) |
|
Scroll Size: |
.01 mA |
|
Load Capacity: |
1000 Ohms Minimum |
|
Weight: |
12 oz. |
|
Size: |
1.43" x 3.15" x 5.7" |
Note 1: 18°C to 28°C
Note 2: 0 to
18°C and 28°C to 50°C |
|
|
|
