|
| |
|
ThermoLogR RTD and ThermoLogR Thermistor Test
Thermometers
Barnant (Oakton Home)
 ThermoLogR RTD Thermometer
- Log up to 1000 temperature readings with time and date.
- Transfer temperature readings to an infrared printer or to your computer via infrared RS-232 adapter
- CAL button enables you to field calibrate the meter.
- Switch selectable temperature units °F/ °C
- Simultaneously monitor current, minimum and maximum readings
- Rugged ABS plastic case and sealed silicone membrane keypad for an IP54 splash proof rating
- Infrared Printer is ideal for on-site documentation. Transfer data without the use of cables—just position printer within 12" (30 cm) of the top of the thermometer. Set print interval rate from once every 3 seconds to once every 60 minutes. To print in intervals longer than 10 minutes the printer must be powered by an AC adapter.
- RS-232 interface connects to your computer 9-pin serial port for easy uploading
of data. Use with most popular RS-232 programs including Windows Terminal® or
Windows 95/98 Hyperterminal®
- The ThermoLogR RTD Thermometer accepts 100 ohm platinum RTD sensors. (order separately)
- The ThermoLogR Thermometer accepts 400 or 700 series thermistor probes. (order separately)
|
|
SPECIFICATIONS
Display: 0.4" H for top LCD, 0.2" H for bottom LCD
Output: infrared
Power: two AA batteries (included)
Battery life: approx. 300 hours
Low battery indicator: yes
Dimensions: 3.3"W x 6.2"H x 1.2"D (84 mm W x 158 mm H x 30 mm D)
Shpg wt: 1 lb (0.5 kg) |
|
Cat. no. |
Type |
Range |
Accuracy |
Resolution |
Probe
Connection,
type |
|
600-1085 |
ThermoLogR RTD
Thermometer |
-330°F to 2210°F;
(-201 to 1210°C) |
±0.06°F (±0.03°C) |
0.01° from -99.99° to +99.99°
0.1° from -100.0° to -330° and
100.0 to 999.9° 1° above 1000° |
3-pin (round);
100-ohm platinum
RTD |
600-1075 |
ThermoLogR Thermistor
Thermometer |
YSI 400 Series Probes
-40° to +302°F
(-40° to +150°C)
YSI 700 Series Probes
-40° to +212°F
(-40° to +100°C) |
±0.06°F (±0.03°C) |
0.01° or 0.1°
auto ranging to
0.1° above 99.99° |
1/4" phone jack;
YSI 400 or 700
series |
ACCESSORIES
Infrared Printer
The infrared printer is ideal for on-site documentation. Transfer data by infrared output, no cables to hook up - just line up data transmission LED located on the top of the thermometer and position printer within 18" (45cm) of the thermometer. Print readings in real time from every three seconds to every 60 minutes or automatically print previously stored data.
|
|
600-0070 |
Adapter, 115 VAC |
|
600-0075 |
Adapter, 230 VAC |
|
611-0090 |
Carrying Case |
|
600-0080 |
Infrared printer. Includes one roll of paper. |
|
600-0082 |
Printer Adapter.110-240VAC, 50/60Hz, 6-FT (1.8-M) cord |
|
37455-82 |
Replacement Paper, 2.25"W X 80'L, pack of 6 rolls. |
RS-232 Interface Adapter
Connects to your computer 9-pin serial port or easy downloading of data. Use with most popular RS-232 programs-Windows® Terminal or Windows 95,98 HYPERTERMINAL®. (Software not included)
600-0092: RS-232 Interface Adapter |
|
|
