|
Cat. no. |
Description |
Time constant |
Dimensions |
|
8415-21 (701) |
General-purpose probe. The most rugged probe we offer.
Vinyl-tipped probe is recommended for short-term liquid
immersion or soil readings. |
7 seconds |
 |
|
8415-26 (731) |
General-purpose probe. Non-immersible, epoxy-tipped; can be
potted in place. Suitable for surface temperature
measurements. |
0.9 second |
 |
|
8415-30 (702A) |
Small,
flexible, general-purpose vinyl-tipped probe. Smaller diameter
than 8415-21. Often used for cuvette temperatures. For
short-term liquid immersion. |
3.2 seconds |
 |
|
8415-28 (709A) |
Attachable
surface probe. Stainless steel cup is epoxy-backed; easy to
tape to flat surfaces. Good for measuring heat loss or
compression efficiency in pipes. Teflon® coated leads. |
1.1 seconds |
 |
|
8415-29 (709B) |
Attachable
surface probe. Designed for more rugged applications than
8415-28; good for measuring heat loss or compression
efficiency in pipes. Has a continuous 10 ft vinyl-covered
lead. |
1.1 seconds |
 |
|
8415-27 (729) |
Small
surface probe. Stainless steel cup is epoxy-backed, easy to
tape to flat surfaces. Good for skin temperature measurements.
Less flexible and more rugged than 8415-28. |
0.3 seconds |
 |
|
8415-31 (708) |
Surface
probe with handle. For skin, oral, axillary, water bath, air,
or surface temperatures. Stainless steel. |
0.6 seconds |
 |
|
8415-25 (705) |
Air
temperature probe. Steel cage around epoxy-encapsulated
thermistor. Use this stainless steel probe for test rooms,
incubators, remote air readings, gas streams. |
10 seconds |
 |
|
8415-22 (703) |
Tubular
probe. Made of stainless steel for rugged use. Use for liquid
immersion; immersible to =transition joint only. |
3.4 seconds |
 |
|
8415-24 (710) |
Tubular
probe with fitting. This rugged stainless steel probe has a
1/8" MNPT) pipe fitting; for readings in pipes or within
closed vessels. Withstands 500 psi. |
3.4 seconds |
 |
