|
Used in conjunction with the
ECA 450, the Flue-Gas
Sample Conditioning System functions to remove water vapor from the flue-gas
sample, thus preventing the formation of water droplets inside the probe hose.
If water droplets were to form, a portion of the gas sample could be absorbed by
the water, thus resulting in lower-than-actual NO2 and SO2 readings.
Water vapor is removed by passing the gas sample through a Peltier Cooler
where the sample is chilled, causing the water vapor to condense. The water is
then pumped out of the cooler and into a water trap.
Features and Benefits:
- Compact conditioner/probe assembly design
- Peltier cooler to remove water from sample
- Built-in filter section
- Condensate pump
- 12" probe tube length with probe stop cone (standard)
- 15' hose length with sample draft & temperature lines
- Maximum operating temperature of 1472 °F (800 °C)
- Optional probe tube lengths available, up to 39"
Ordering Information
|
