|
Fyrite Analyzers are available for either CO2 or O2
analysis, and each model is produced in three scale ranges. All six instruments
are similar in appearance and size, but differ in important construction
details, as well as in the absorbing fluids. Each model, therefore, is suitable
only for the particular gas analysis or scale range for which it has been
manufactured. Accuracy is within ±1/2% CO2 or O2.
Fyrite absorbing fluid is selective in the chemical absorption of carbon
dioxide or oxygen, respectively. Therefore, the Fyrite ’s accuracy, which is
well within the range required for industrial and professional applications,
does not depend upon complicated sequential test procedures. In addition, Fyrite
readings are unaffected by the presence of most background gases in the sample.
The number of tests possible with one fluid charge depends on the
concentration of samples being tested. At midpoint scale reading the CO2
fluid is good for approximately 300 gas samples and the O2
fluid for 100 tests. The need to replace fluid can be easily determined with a
simple test, and replacement is an easy procedure. These test procedures, as
well as other good information, are provided in the Fyrite manual 11-9026.
Fyrite Indicators have a broad range; they may be exposed to ambient
temperatures from -30° to 150°F, and gases up to 850°F may be tested with
standard aspirator sampling equipment (special sampling equipment for higher gas
temperatures or dry gases is available). For temperatures above 1400 °F, a
ceramic sampling tube is available.
Ordering Information
Single Kits – Single Kits contain either a Fyrite CO2
or a Fyrite O2 Indicator. Sampling Assembly and a carrying
case.
Duplex Kits – Special Fyrite Kits containing various combinations of
Oxygen and Carbon Dioxide Indicators.
Repair Kits – One bottle of Fyrite fluid, valve plunger gasket, top
gasket, screws, diaphragm, and envelope of filtering material.
Refill Kits – Two bottles of Fyrite fluid, top gasket, screws and
envelope of filtering material.
USA
Single Kits (1) |
Range |
| CO2
Testing |
|
| 10-5053 |
0–7.6% |
| 10-5000 (2) |
0–20% |
| 10-5032 |
0–60% |
| O2
Testing |
|
| 10-5054 |
0–7.6% |
| 10-5011 |
0–21% |
| 10-5046 |
0–60% |
|
Export
Single Kits
(3) |
Range |
| CO2
Testing |
|
| 10-5083 |
0–7.6% |
| 10-5001 |
0–20% |
| 10-5033 |
0–60% |
| O2
Testing |
|
| 10-5084 |
0–7.6% |
| 10-5012 |
0–21% |
| 10-5042 |
0–60% |
|
| Fyrite Fluid |
Range |
| CO2 |
|
| 10-5100 |
0–7.6% |
| 10-5057 |
0–20% |
| 10-5057 |
0–60% |
| O2 |
|
| 10-5103 |
0–7.6% |
| 10-5060 |
0–21% |
| 10-5060 |
0–60% |
|
| Repair Kits |
Range |
| CO2 |
|
| 11-7053 |
0–7.6% |
| 11-7052 |
0–20% |
| 11-7052 |
0–60% |
| O2 |
|
| 11-7055 |
0–7.6% |
| 11-7054 |
0–21% |
| 11-7054 |
0–60% |
|
| Duplex
Kits |
CO2
Range |
O2
Range |
| 10-5020 |
0–20% |
0–21% |
| 10-5021 (4) |
0–20% |
0–21% |
| 10-5090 (5,6) |
0–7.6% |
0–7.6% |
| 10-5106 (5,6) |
0–7.6% |
0–21% |
| 10-5111 (5,6) |
0–60% |
0–21% |
|
| Refill Kits |
Range |
| CO2 |
|
| not available |
0–7.6% |
| 11-7047 |
0–20% |
| 11-7047 |
0–60% |
| O2 |
|
| not available |
0–7.6% |
| 11-7050 |
0–21% |
| 11-7050 |
0–60% |
|
(1) Domestic shipments only
(2) Also includes Fire Efficiency Finder
(3) Export use only. Kits shipped without fluid.
(4) Export only
(5) Special order only; check factory for price and availability
(6) No export equivalent.
Note: United States and Foreign Postal
Regulations prohibit Fyrite fluid, in or out of any unit, from being shipped
parcel post.
Additional Product Information
 (495K) Data Sheet
(408K)
Instruction Manual
|
